Tree Allometrics

Equations / Foliage biomass

Liriodendron tulipifera Foliage W = aD^2H (Table 11)

Foliage biomassLiriodendron tulipifera · MagnoliaceaeSouth KoreaplantationRead from the original paper
Photo of Liriodendron tulipifera
© Nicholas A. Tonelli · CC BY · iNaturalist
Equation

As printed (Table 11 (W=aD^2H))

Foliage 0.0003 0.812

In this library's units, ready to compute (kg)

Foliage biomass = 0.0003 * D^2 * H
D
Diameter at breast height (1.3 m), cm
H
Total tree height, m

W = dry weight in kg (Table 7 in kg), D = DBH in cm, H = tree height in m. The paper prints no correction factor, so none is applied. DBH 5.9-38.7 cm and height 6.6-26.6 m are the min and max of the per-site ranges in Table 6 (Suwon, Jangseong, Gangjin; ages 8-34 years).

Source
조사한 백합나무 표준목은 40본이나 뿌리까지 굴취한 것은 21본이다.
Trees measured · 결과 및 고찰 1 (Results 1)
Trees measured
40
DBH range
5.9–38.7 cm
Height range
6.6–26.6 m
R²
0.812
Method
regression in SPSS 19.0
Where
Suwon (Gyeonggi), Jangseong and Gangjin (Jeollanam-do), South Korea
Last checked
2026-11-02
Calculate
Height from
0.81
Foliage biomass (kg)
0.381
Carbon (kg), ×0.47
1.396
CO₂e (kg), ×44/12
Fitted DBH range0123456510152025303540DBH (cm)Foliage biomass (kg)Foliage biomass

Shaded: the DBH range the model was fitted on. Other inputs held at the values above.

Checks this equation passes

On every build, the library's form and the paper's own form (in its units) must both give these values within 1%.

InputsExpectedWe getFrom
D = 15, H = 120.8100.810Computed from the printed form
computed from the Table 11 coefficients
D = 30, H = 225.945.94Computed from the printed form
computed from the Table 11 coefficients

Report a problem with this equation · JSON

Related

Compare these curves