Tree Allometrics

Equations / Aboveground biomass

Dry miombo, total AGB, All 44 species (trees and shrubs), D only

Aboveground biomassTrees and shrubs, 44 speciesTanzanianaturalRead from the original paper
Many species, no single photo
Equation

As printed (Table 2, total biomass, model 4)

Combined (N = 104); 44 species ... Total biomass ... (df = 101) 4 −1.9564 (0.102) 2.3260 (0.035) — 1.4–62 0.974 0.242 0.327 12.60

In this library's units, ready to compute (kg)

Aboveground biomass = 1.0297 * exp(-1.9564 + 2.326 * ln(D))
D
Diameter at breast height (1.3 m), cm

ln-ln OLS (species models) or linear mixed model with species random effect (group models); total aboveground biomass is stump + stem and branches + twigs and leaves, so foliage is included. The paper states CF = exp(RMSE²/2) and that it was applied to predictions; the CF value (1.0297) is not printed and is computed here from the printed RMSE (0.242) by that stated formula, and applied in both forms. The R² shown for group models is the likelihood-ratio R² named in the Table 2 note; for species models it is adjusted R².

Source
CF = exp⁡(RMSE2/2), which was applied to the predicted values of volume and biomass
Correction factor · Section 2.5 (Sprugel correction)
Y is volume (m3) or biomass (kg); Dbh is diameter at breast height (cm); ht is total height (m); and wd is wood density (kg m−3).
Units · Table 2 note
The minimum and maximum sizes of sample trees/shrubs were 1.4 cm and 62.0 cm in diameter at breast height
Largest DBH · Section 2.2 (study-wide)
Trees measured
104
DBH range
1.4–62 cm
Height range
2.5–18.2 m
R²
0.974
Correction factor
1.0297 (applied)
Method
linear mixed model on ln-transformed data (species random effect)
Where
Gangalamtumba Village Land Forest Reserve, Iringa, Tanzania (dry miombo woodland)
Last checked
2026-11-02
Calculate
155
Aboveground biomass (kg)
72.7
Carbon (kg), ×0.47
266
CO₂e (kg), ×44/12
Fitted DBH range0200400600800510152025303540DBH (cm)Aboveground biomass (kg)Aboveground biomass

Shaded: the DBH range the model was fitted on. Other inputs held at the values above.

Checks this equation passes

On every build, the library's form and the paper's own form (in its units) must both give these values within 1%.

InputsExpectedWe getFrom
D = 20155155Computed from the printed form
hand-computed from the published form
D = 40775775Computed from the printed form
hand-computed from the published form

Report a problem with this equation · JSON

Related

Compare these curves