Tree Allometrics

Equations / Aboveground biomass

Pinus oocarpa, power model, D only (model 1)

Aboveground biomassPinus oocarpa Schiede · PinaceaeMexiconaturalRead from the original paper
No openly licensed photo yet
Equation

As printed (Table 4, model 1)

B̂i = 0.10012 * D^2.4589

In this library's units, ready to compute (kg)

Aboveground biomass = 0.10012 * D^2.4589
D
Diameter at breast height (1.3 m), cm

The authors recommend this model for P. oocarpa (p. 8). R2adj 0.977. Total aboveground biomass (stem, branches, foliage, cones). No back-transformation correction factor is stated, none applied.

Source
33 árboles
Trees measured · Resumen / Table 2
Trees measured
33
DBH range
12.5–82 cm
Height range
7.15–29.1 m
Method
Power model fitted as log-linear regression (Table 3, models 1-2); no correction factor stated
Where
Microcuenca del río Hueyapa, Guerrero (bosque templado)
Last checked
2026-11-02
Calculate
554.7
Aboveground biomass (kg)
260.7
Carbon (kg), ×0.47
955.9
CO₂e (kg), ×44/12
Fitted DBH range05001,0001,5002,0002,5003,0003,500102030405060DBH (cm)Aboveground biomass (kg)Aboveground biomass

Shaded: the DBH range the model was fitted on. Other inputs held at the values above.

Checks this equation passes

On every build, the library's form and the paper's own form (in its units) must both give these values within 1%.

InputsExpectedWe getFrom
D = 33.3554.7554.7Computed from the printed form
computed from the published form
D = 61.12,4672,467Computed from the printed form
computed from the published form

Report a problem with this equation · JSON

Related

Compare these curves